TRANSX User Input

These are the user input instructions extracted from the TRANSX 2.15 source. They are more up to date than the instructions given in the published version of LA-12312-MS (July 1992). Hypertext links to the appropriate sections of the manual have been added for the user's convenience.
    ---USER INPUT (FREE FORM)-----------
 
    CARD 1   RUN TITLE (HOLLERITH DESCRIPTIVE COMMENT)
               72 CHARS MAX. NO DELIMITERS OR TERMINATOR REQUIRED.
               STOP TERMINATES JOB
 
    CARD 2   OPTIONS
     IPRINT   PRINT (0=LONG/1=SHORT)
     IOUT     OUTPUT FORMAT
               0   NONE
               1   CARD (6E12)
               2   CLAW (CARD WITH SEPARATE EDITS)
               3   FIDO
               4   ANISN (FIDO WITH 2*L+1 FACTOR)
               5   GOXS (GROUP-ORDERED BINARY)
               6   ISOTXS (CCCC-IV MATERIAL-ORDERED BINARY)
               7   ANISNB (ANISN BINARY)
               8   ANIGIF (ANISN GROUP-ORDERED BINARY)
     IPROB    PROBLEM (0=DIRECT/1=ADJOINT)
     ISET     ISET=I FOR A SIMPLE SET FOR PARTICLE I,
              ISET=IJ FOR A COUPLED SET FOR PARTICLES I AND J,
              ISET=IJK FOR A THREE-WAY COUPLED SET, ETC.
     IFORM    FORM (1=MATWISE/2=GROUPWISE)
     ITIME    FISSION TIME (1=STEADY-STATE/2=PROMPT)
     IDECAY   DECAY TIME (RESERVED)
     ITRC     TRANSPORT CORRECTION
               0   NONE (NOT FOR SN CODES)
               1   CONSISTENT-P
               2   DIAGONAL
               3   BELL-HANSEN-SANDMEIER
               4   INFLOW
               5   INCONSISTENT-P
     ICOLL    COLLAPSE (0=NO/NFINE=YES)
     INITF    INITIAL FLUX
               0   USE LIBRARY WEIGHT FOR P0 FLUX
               1   READ P0 FLUX ON CARDS
               2   READ RTFLUX INTERFACE (CCCC-IV TOTAL FLUX)
               3   READ RZMFLX INTERFACE (ZONE MOMENTS FLUX)
               4   READ RZFLUX INTERFACE (CCCC-IV ZONE FLUX)
             12-14 TRIGGERS REMAP OF INPUT FLUX
              -N   MAKE ELASTIC SCATTERING FLUX CORRECTION
          (FOR LAST FIVE ITEMS, DEFAULT=FIRST OPTION)

    CARD 3   PARAMETERS
     NGROUP   NUMBER OF GROUPS IN TABLE
     NL       NUMBER OF LEGENDRE TABLES
     NTABL    TABLE LENGTH
     NUP      NUMBER OF UPSCATTER GROUPS
     NTHG     NUMBER OF THERMAL GROUPS
     NMIX     NUMBER OF OUTPUT MIXES OR MATERIALS
     NREG     NUMBER OF REGIONS
     NMIXS    NUMBER OF MIX SPECIFICATIONS
     NED      NUMBER OF EXTRA EDITS
     NEDS     NUMBER OF EDIT SPECIFICATIONS

          SET NGROUP NEGATIVE TO TRIGGER
          MATERIAL RANDOM ACCESS MODE.

    CARD 3A (NGROUP NEGATIVE ONLY)
     MPATH    PATHS FOR MATXS DIRECTORY (24 CHAR MAX) 

    CARD 4   MIX NAMES HMIXN    
     NMIX HOLLERITH MIX NAMES (6 CHARACTERS MAX)

    CARD 5   REGION AND HETEROGENEITY SPECS
     HREGN    REGION HOLLERITH NAME (6 CHARACTERS MAXIMUM)
     RTEMP    REGION TEMPERATURE (K) (DEFAULT=300)
     RVOL     REGION VOLUME  (DEFAULT=1.)
     IHET     HETEROGENEITY OPTION (DEFAULT=0=NO SELF SHIELDING)
               0   NO SELF SHIELDING
               1   CONSTANT ESCAPE CROSS SECTION
               2   CYLINDER BY BELL APPROXIMATION
               3   CYLINDER IN HEX LATTICE BY SAUER APPROXIMATION
               4   CYLINDER IN SQUARE LATTICE BY SAUER APPROXIMATION
               5   SLAB CELL BY BELL APPROXIMATION (REFLECTIVE)
               6   SLAB CELL BY E3 APPROXIMATION (REFLECTIVE)
               7   SLAB CELL BY BELL APPROXIMATION (PERIODIC)
               8   SLAB CELL BY E3 APPROXIMATION (PERIODIC)
              -N   CONTINUE SPECIFYING THE CELL

            THE REST OF THE PARAMETERS ON CARD 5
            DEPEND ON THE VALUE OF IHET.  THESE VALUES
            ARE ONLY GIVEN FOR THE FIRST REGION OF EACH CELL.
 
     -- IHET=1 -- CONSTANT ESCAPE
 
     CHORD    MEAN CHORD LENGTH (CM)

     -- IHET=2 THRU 8 -- DANCOFF APPROXIMATIONS

     BELL1    BELL CORRECTION TO RATIONAL APPROX.
     BELL2    BELL CORRECTION TO DENOMINATOR

          REPEAT CARD 5 NREG TIMES
 
    CARD 6   REMAP INSTRUCTIONS (ABS(INITF).GE.12 ONLY)
              FLUX POINT, ZONE, OR REGION FROM INPUT FILE TO BE
              ASSIGNED TO EACH TRANSX REGION (NREG INTEGERS)
 
    CARD 7   MIX SPECIFICATIONS
     IMIX     MIX NUMBER (0 TO NMIX)
     IREG     REGION NUMBER
     HMIX     NAME OF ISOTOPE FROM MATXS
     DENS     MULTIPLIER (FRACTION OR DENSITY) (DEFAULT=1)
     HINC     THERMAL INELASTIC NAME (DEFAULT=BLANK),
              OR CONSTITUENT CROSS SECTION FLAG
                ("RC" FOR REGION CONSTITUENT, OR "CC" FOR CELL)
     HCOH     THERMAL ELASTIC NAME (DEFAULT=BLANK)
     HMOD     MATRIX MOD REACTION (DEFAULT=BLANK=TOTAL)

           REPEAT CARD 7 NMIXS TIMES
 
    CARD 8   EDIT NAMES
     HED      NED HOLLERITH EDIT NAMES (6 CHARACTER MAXIMUM)

    CARD 9  EDIT SPECIFICATIONS
     JEDPOS   EDIT POSITION (USUALLY IN RANGE FROM 1 TO NED)
               (-N TO PUT DELAYED GAMMAS IN GROUP N OF COUPLED SET)
     HEDNAM   NAME OF REACTION FROM MATXS
     EDFACT   MULTIPLIER (DEFAULT=1)
     HEDMAT   ISOTOPE NAME FROM MATXS (DEFAULT=BLANK)
              IF BLANK, USE SPECIFICATION FOR ALL ISOTOPES
 
           REPEAT CARD 9 NEDS TIMES
 
    CARD 10   COLLAPSE SPECIFICATIONS (IF ICOLL.NE.0)
     INPUT NUMBER OF FINE GROUPS IN EACH COARSE GROUP
 
    CARD 11  INPUT FLUX FUNCTION (INITF=1 ONLY)
     INWT     FLUX FOR FINE GROUPS TO BE USED FOR
                 ALL ORDERS AND ALL REGIONS
 
    SPECIAL INPUT VALUES
     HED=*CHI*      THIS POSITION TO CONTAIN FISSION CHI
     HEDNAM=*CHI*   DITTO
     HED=*TRD*      THIS POSITION TO CONTAIN TRANSPORT
                    CROSS SECTION FOR DIFFUSION.  IF A P1 FLUX
                    IS GIVEN OR COMPUTED, THE INFLO DEFINITION
                    WILL BE USED.  OTHERWISE, OUTFLO WILL BE USED.
     HEDNAM=*TRD*   DITTO
     HED=*GAM*      THIS POSITION TO CONTAIN THE FIRST OF NGG GAMMA
                    PRODUCTION EDITS
 

TRANSX HyperText Manual
TRANSX HyperText Help Package
T-2 Nuclear Information Service